RED ALARM LIGHT ON ATT BOX HOW TO

Try aiming your antenna away from the source of the overload. Solid amber light or a blinking green and amber light?

For a vehicle, make sure your outside antenna is at least a foot away from any windows. We typically recommend at least 30 to 40 feet of separation between the two antennas. Make sure that you have enough separation between the two of them for building installations. The best thing to do is to check your inside and outside antennas. Solid red light or a blinking green and red light on your booster? Then ensure the other end is plugged correctly into the booster or amplifier unit. Double check your power cord to make sure that it is plugged into the wall properly and that the power plug is working. If no lights appear on your booster, that means that it is not getting power. If so, then leave the booster with the blinking pattern that you see. Your booster may provide you with enough coverage area for your needs. The best thing to do would be to check your signal area to see what you have. This doesn't necessarily mean that you have lost any signal or coverage area. The blinking green and amber or orange light means that your signal amplifier is still overloading a little bit. Or a cell phone provider is sending out a very strong signal to your area. A common cause of this would be a cell phone tower too close to your location. Solid amber or orange light.ДЄ solid amber light means that the booster is overloaded and has shut off. If the Booster is providing you with enough coverage for your needs, then leave the blinking pattern the way it is. The best thing to do is to test your coverage area to see how much you're actually losing or gaining. But the cellular booster is still working possibly with reduced coverage. Blinking green and red lights.ДЄ blinking or flashing green and red light means that there is still some feedback. Then test your signal to make sure you're getting the coverage you need. It simply means that your booster is functioning properly. If you see solid green lights on your booster, that is good. Therefore, you need to separate them a little bit farther to avoid this feedback loop. If you see that one of these lights has a color other than green, that means the problem exists only on that one frequency band.ДЄ solid red light on your booster means that the booster has shut down due to some feedback Your inside and outside antennas are probably a little too close to each other. Each of these lights represents a frequency band.

Some of our cell phone boosters have four lights.

RED ALARM LIGHT ON ATT BOX HOW TO

Today, we're going to show you what the solid and blinking or flashing lights on our cell phone signal boosters mean, and how to use that information to ensure your cell booster is functioning correctly. HereвЂ™s how to recognize problems with the help of those flashing or blinking red, green, and amber or orange lights - And how to solve them. The cell phone signal booster has many kinds of alert lights for troubleshooting.

Red alarm light on att box